About this role
- Check components at start of shift (valves/cans)—verify Item code with Shop Packet
- Every hour and at start of shift check the following:
- weights of concentrate and propellant
- pressure
- vacuum
- crimp depth & diameter, stem height
- water bath temperature and water level
- Test the checkweigher machine using an challenge can checkweigher machine using an challenge can
- Make sure there is water in the water bath maintained at or above 130oF
- Check for dents and dirt
- When using Nitrogen, make sure it is going in the can
- Check batch # with compounding to make sure you have right concentrate, also verify with green release sticker from the lab.
- At the end of a run, do a good wash-up:
- clean up filling heads, conveyors, hopper
- gas room
- Fill out Filling Room Cleaning Log
- At the end of a run, remove all cans/valves from the last run
- Fill out Line Set-up Form in the following areas:
- Inspect Cans/Labels for damage
- Check codes against batch sheet
- Concentrate Release Number
- Sanitation of Surge Tank and Filling Heads Completed
- Scale Set-up (for tare weight)
- Line Set-up Purge
- Water temp between 55°C - 65°C(130°F-154°F).
- No green stickers are to be left on pails.
- Perform other duties as assigned.
Responsibilities
- Overall responsibility of the Line operator will be to perform on line duties following GMP, SOPs and specific training according to company Quality and Safety policies. Follows and adheres to SOPs, GMP, and GDP.Follows all the HC and FDA GMP regulations applicable to the production facility and surroundings.
Immigration pathway
ON • Express • onsite • TEER 3